Find The Right Specification On Female Keystone Modular Center Plates Specification & Features Product Name: White Female RCA Keyst...

Find The Right Specification On Female Keystone Modular Center Plates

Specification & Features

• Product Name: White Female RCA Keystone Jack Modular with Red Center for Wall Plates (5/pack)
• Brand: The Wires Zone
• Model: TOL44-RED-5

• RCA Jack for Face Plate
• Ideal for Home Theaters, High Resolution Monitors and High Fidelity Surround Sound Systems
• Ideal for Residential or Commercial Use
• RCA style Keystone Jack - Coupler type (female connectors on the front and back)
• For use with Keystone panels or wall plates

Red Insert Color Package of 5

Comments List

• Female Keystone Modular Center Plates Reviews:

  What form does the computer file received in the result of the scan? Image? Profile wire? Can we, from this file, to determine with accuracy the dimension of an element of the object scanned? Thank you in advance. Sincerely. D. AubertAfter a few problems of implementation, this 3D printer works well with good accuracy. A small problem with reading the SD card but it is happening because everything goes through the USB cable. A little tip, tighten the nuts after use of several hours (3 to 4 H). A pity that the two wire coils delivered with the same color and it would have been wise to vary. Also the software in French so that the menu would be a very good point. I recommend this printer because the price/quality ratio and very good (Two nozzles). I'm very happy with this 3D printer, of course, as it is a kit, there are a lot of assembly before starting. At the end of two days, I was able to make my first impressions. The installation manual is clear and French, you do not ask too many questions. This is my second printer in a kit, the first being smaller and less well finished, I had already been confronted to the difficulties of 3D printing, namely adjustment of the tray, for races, printing temperature, adhesion to the support, management of the coil of wire, insertion of the filament... Here, much less surprise as my previous experience, the purposes of racing, provide a good initialization before each impression, and the integrated software that facilitates the adjustment of the level of the plateau.

• Cheap Female Keystone Modular Center Plates:

  The support of the wire coil does its work and the insertion of the thread is simple (once one has found the button to push, perhaps too well integrated into the design of the extruder.). The chains allow a ranger and guide the wires during printing. Still problems with the adhesion of the printed pieces to the set, I haven't tried it with lacquer, I used a coating buildtak, which ensures a good grip, but with which, at approximately€ 20 the unit, I hope to be able to do a lot of impressions. The irony is that it adheres very well, so, (if one starts the print close enough to the support), the object is difficult to detach, even using a spatula fine. So, in addition to the fingers, the coating may suffer a little bit. I appreciate that the printer is 'open', as a result, the parts are produced by 3D printing and, therefore, reproducible case of a problem, or even evolutionary. And if there is a concern, I think I don't have too much difficulty to identify it and be able to correct it since I assembled the machine..

• Cheap White Female RCA:

  A week after the order, and that I see in the followed that the printer has not moved from its repository, I called Amazon to learn that the printer has been lost (basically that someone was served) and they can't resend it right away, but they can only reimburse me for that I can recommend it. With that is added the refusal of gesture trade which in this case would have been the slightest of things: 900€ lost in the nature all the same!!! In the end I received after having registered (and 3 weeks after my first order), it works perfectly and is worthy of its reputation. An investment that's worth it if it is on as he arrives at good port! The machine is as expected. The easy-to-handle and fast. Nothing to complain about, that's perfect. A single shadow table: Fedex. Perpignan-at home (20km) : 1 week. Fortunately, the printer is to keep those promises. The possibility of getting it to work by SD card, as well as under windoze and Linux, is one of the strong points. After a fitting summary and a calibration is necessary for good printing, we have a lot of fun to print its first files downloaded. The printer is supplied with two reels of plastic with colors available at the time. The printer is already fully functional at the reception, however, it is necessary to be careful when buying spare coils on the diameter suitable (1. 75 mm). During the change of reel, it is preferable to force a load, just to heat the nozzle before reversing the process.

• Best Buy White Female RCA:

  This avoids the breakage of the filament and removal of unnecessary head. Another trick and use the adhesive paper provided with the printer on the glass plate. It is not a gadget. It is essential for the adhesion of the parts a little high.. I bought this printer a month ago, here are my commentairesDescriptif :This 3D printer designed by geeetech is available in 2 versions : the standard version (the one sold by amazon) with some plastic parts printed in 3D, and the "PRO" version without printed parts (replacement parts alu die-cast) and with a few improvements (pulleys of returns for the belts).

• On Sale White Female RCA:

  . Positive Points :- in spite of a carton received in a room state, the whole of the parts has been preserved - for the assembly of the printer, no piece has failed - after several modification and adaptation, the mechanical assembly is functioning properly at 90% (automatic origin failed) negative Points :- the documentation specified mounting does not correspond to the ordered model (you should use the wiki at geeetech, and not the pdf file of assembly) - plastic parts printed in 3D are of very poor quality : lack of holes, passage of belt impossible, too fragile, not very precise - 2 linear bearings (linear bearing) on 6 not operating, the seller required me to send them back - several pieces of acrylic are editing (do not do like me! Don't force in the emboitant! I've broke 2 :() - the capacities of the machine do not match the description : I wanted to extrude ABS at 240°C and from 230°C the body of the head extrusion melted!! This printer can only print PLA (I tested, it works) - the firmware is provided with bad geometrical parameters (it is necessary to re-measure the connecting rods, the central support and the slide, I got some dimensions on the STL files provided by geeetech) - the connection of the heating plate (hot bed) is not correct, only half of the tray is heated - the system of care original on the tray is poorly designed, it is impossible to make it work properly.

• White Female RCA Reviews:

  - there is play between the rods and the axes of support (I added rubber bands between each pair of rods to act as a catch-up game automatic) - the chassis of the printer is a little rigid, I think set 2 plates in plexi transparent, it should improve things... - the provided plug is not usable in EuropeConclusion :My wish was to familiarize myself with the technologies used in 3D printers, I learned a lot but unfortunately the model sold is very limited, not very precise and fairly fragile. I'm now going to rebuild part of the machine by keeping what works well (mainly electronics). I do not recommend to buy this model for a non-do-it-yourselfer or for print on a material other than the PLA. De on my side, after me being stubborn and wanting to use the ABS, I damaged the 2 extrusion heads and the central support. I've just ordered from geeetech kit "PRO" to replace the faulty pieces and have the extruders metal (I'm waiting for the order...), I advise you to buy the PRO version directly from the manufacturer! Product quality, assembly is facilitated by the documentation with the pictures. The after sales service is very efficient, I have contacted them on a Sunday by mail, the same evening, the exchange of power was validated. The following Thursday the new power supply is exchanged via a carrier. First impressions are good..... Really happy with my Dreamer.

• Best Buy Female Keystone Modular Center Plates:

  It seems to be similar to the Flashforge Dreamer. A very short manual on the SD card, but a small passage by the website Flashforge US it is necessary to have the latest manual. Otherwise, the machine really works very well. Fast print. The software is also very simple to use, in addition, with the wifi enabled, it is possible to monitor the temperature, and to control the printer without a cable. The software can also directly download a template to print via wifi. It is possible to use the gcode directly (with other software), and as a small community-monte around this printer (google group), the setting is already available. On the shipment, no customs fees (it is well). The 3D scanning feasible, following the instructions provided in the manual, are of good quality and are accurate in terms of metrics (monitored by the measurement of the real and scanning). The ease of use is remarkable, but to get quality results you have to work a little bit. Although it is not a professional tool (but the price is 40 times lower than that of a professional instrument!!!) the quality of the mesh is good. The software could/should be improved. The speed of movement of the instrument affects the quality of scan: slower is better.. This is the model black metal that I own. Stronger I think than the wooden version. No problem getting service, it has functioned on the first shot. A couple of things.